20 vs 22 Inch Chainsaw Bar: Which Should Dealers Stock?

DEALER ASSORTMENT PLANNING

20 vs 22 Inch Chainsaw Bar: Which Versions Should Dealers Stock?

For dealers comparing a 20 vs 22 inch chainsaw bar, the main purchasing question is how often customers actually need the extra reach. Build the assortment around routine cutting work and local replacement-chain availability, then decide whether demand justifies carrying both versions.

A longer bar may attract attention in a showroom, but appearance alone does not establish a useful selling advantage. This guide concerns choosing a resale assortment—not changing the cutting attachment on a machine already in service.

Quick answer: Stock the version that fits the cutting work customers perform regularly. Evaluate a 20-inch setup as the main item where its reach meets routine demand; consider a 22-inch version where recurring enquiries justify the longer attachment. Before carrying both, obtain the supplier-approved bar, chain and sprocket specification for each version and establish a replenishment route for matching replacement chains. Compare complete inventory commitments, including service stock, rather than machine prices alone. Set quantities from sales records and unmet enquiries; there is no universal order split that suits every dealer.

1. Separate routine cutting work from occasional requests

Ask retailers what customers normally cut: prepared firewood logs, fallen branches, farm timber or larger stems. Distinguish the work that brings people into the shop regularly from the exceptional job they mention when asking for a larger machine.

Nominal bar length does not promise comfortable, single-pass cutting through every log of the same diameter. Usable reach depends on the installed attachment and the cutting approach. Operator experience, access around the timber and workpiece support also affect suitability.

Where customers rarely use the full reach of a 20-inch setup, a 22-inch version needs a clear commercial role. Regular requests for additional reach justify evaluating the longer option, but the stocking decision still needs evidence from enquiries and sales.

2. Compare 20 vs 22 inch chainsaw bar options by shelf role

Two versions are easier to sell when staff can explain the application behind each choice. Use the following comparison to structure the assortment discussion, rather than treating bar length as a performance ranking.

Stock option	Reason to evaluate it	Evidence needed before ordering
20-inch version	Routine customer work does not require the additional reach.	Existing sales, typical cutting tasks and availability of the matching chain loop.
22-inch version	Recurring work justifies a longer attachment and customers can handle the approved setup appropriately.	Repeated requests for more reach, a representative evaluation and a practical replacement-chain supply route.
Both versions	The dealer network serves two distinct purchasing needs.	Separate stock identification, service coverage and sufficient demand to support both items.

If the only sales explanation is that one version looks larger, the assortment may create confusion. Keep recommendations tied to the customer’s work, and avoid describing the longer version as faster, safer or suitable for a higher duty level without supporting information.

3. Use TM-CS5805 to evaluate two clearly identified versions

The TM-CS5805 gasoline chain saw lists 20-inch and 22-inch guide-bar options. That makes it relevant to dealers assessing two cutting-attachment versions within one model range before considering another machine family.

The listing also gives 0.325-inch or 3/8-inch chain-pitch options. These describe alternative configurations; they do not establish that components can be mixed or that every possible combination is offered. Obtain the complete approved bar, chain and sprocket combination for each proposed stock item.

MODEL FOR ASSORTMENT EVALUATION

TM-CS5805 Gasoline Chain Saw

A relevant option for importers comparing 20-inch and 22-inch resale versions under a shared model name. Treat each selected configuration as a separately identifiable saleable item.

Procurement focus: confirm the available attachment combinations and matching replacement-chain references before assigning quantities.

Review TM-CS5805 Options

One model name is insufficient for the service counter. Staff must be able to identify the version on the shelf and supply its correct replacement chain without guessing from the nominal length.

4. Evaluate complete setups under representative conditions

Bar length describes the attachment, not the engine’s ability to maintain cutting speed in every material. Cutting demand can increase as more cutters engage the wood. Chain sharpness, cutter design, timber condition and feed pressure also influence the result.

Compare complete supplier-approved setups under comparable conditions. A sharper chain on the longer bar can distort the comparison, while a short demonstration in small timber says little about work using substantially more of the attachment.

Record during evaluation: the timber being cut, the installed attachment specification, chain condition and the trained operator’s observations about handling and cutting behaviour. Keep observations separate from claims about productivity.

Any cutting demonstration requires a trained operator, suitable protective equipment and securely supported timber. Additional reach does not replace safe technique or instruction.

5. Price the service stock alongside the machines

A chainsaw may be an occasional purchase, while replacement chains create recurring service demand. Check which specifications the service counter already handles and whether the proposed versions fit that range.

Bar length alone cannot identify a chain loop. Pitch, gauge and drive-link count must match the confirmed cutting system. Replacement bars also require the correct mounting arrangement. A locally available chain described by the same nominal length is not automatically compatible.

Request separate prices for the two complete machine versions, then include matching chain loops, any separate bar stock and the work involved in identifying and replenishing each item. If the 22-inch version needs a loop that few local shops carry, establish whether your business or another dealer will maintain supply.

Choose quantities from sales by bar length, unmet enquiries, replacement-chain turnover and requests from regional dealers. For a new market, ask whether a limited initial assortment is commercially available; mixed quantities or trial orders should not be assumed.

6. Complete the importer and dealer assortment checklist

Use this review to turn the comparison into an order proposal with identifiable versions and a workable service plan.

Application evidence: record routine cutting tasks separately from occasional requests for larger timber.
20 vs 22 inch chainsaw bar demand: identify the sales or enquiry evidence supporting each version.
Complete setup: obtain the approved bar, chain and sprocket specification for each quoted item.
Chain identification: record pitch, gauge, drive-link count and the matching replacement reference.
Replacement bars: confirm the mounting arrangement if separate bar stock is planned.
Evaluation record: retain the cutting conditions and observations used to assess the versions.
Stock investment: compare complete machines and supporting service inventory together.
Order availability: confirm whether the proposed quantities and mixed assortment are accepted.
Stock identification: assign a distinct internal reference to each selected configuration.
Replenishment review: track sell-through and chain demand separately to guide the next order.

Give retail staff a short application-based explanation for each version. Clear shelf identification should support that explanation and connect each machine to its service references.

7. Questions dealers ask before carrying both lengths

Should a dealer stock both a 20 and 22 inch chainsaw bar version?

Carry both when customer demand supports two distinct applications and the business can supply their matching replacement chains. A second length needs a clear role and its own stock identification.

Does a 22-inch bar make the chainsaw a higher-performance model?

Length alone does not establish a higher performance tier. Compare the complete approved setup in representative timber, accounting for chain condition, handling and the cutting demand.

Can replacement chains be ordered using bar length alone?

No. The loop must match the confirmed pitch, gauge and drive-link count. Use the supplier-confirmed replacement reference for the selected cutting system.

Are all listed TM-CS5805 bar and pitch combinations available?

The public listing does not establish every possible combination. Ask which complete configurations are offered and have the selected combination identified in the quotation.

What is the right quantity split for a first order?

There is no universal split. Use existing sales and unmet enquiries where available. When market evidence is limited, discuss the available initial assortment and quantity requirements with the supplier before committing.

8. Request a quotation that separates the two versions

For a TM-CS5805 enquiry, provide the typical cutting application, expected quantities for each bar length and the chain specifications already supported in your market. Request a side-by-side offer identifying each complete cutting setup and its matching replacement-chain reference.

A useful 20 vs 22 inch chainsaw bar comparison should lead to versions your dealers can explain, sell and replenish. If quantities remain undecided, use the separate offers to assess stock investment before setting the order split.

Ask About Available Configurations